Last active
June 26, 2018 07:51
wintermute config files & dmesg @ r335576+8a125fa67c5d
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # ansible_managed | |
| hostname="wintermute.skunkwerks.at" | |
| # kernel | |
| kld_list="linux64 fuse nvidia-modeset ipmi smb ichsmb dtraceall cc_htcp filemon cuse" | |
| update_motd=YES | |
| # daemons | |
| zfs_enable="YES" | |
| syslogd_flags="-ss" | |
| sendmail_enable="NONE" | |
| local_unbound_enable="NO" | |
| # network | |
| gateway_enable=YES #for ipv4 | |
| ipv6_gateway_enable=YES #for ipv6 | |
| ifconfig_igb0="DHCP" | |
| ifconfig_igb0_ipv6="inet6 accept_rtadv" | |
| ifconfig_ue0="DHCP" | |
| ifconfig_ue0_ipv6="inet6 accept_rtadv" | |
| # ifconfig_igb1="inet 192.168.0.0/16" | |
| # ifconfig_igb1_ipv6="inet6 accept_rtadv" | |
| # wifi | |
| # wlans_rtwn0="wlan0" | |
| # wlans_iwm0="wlan0" | |
| # ifconfig_wlan0="WPA DHCP" | |
| # ifconfig_wlan0_ipv6="inet6 accept_rtadv" | |
| # create_args_wlan0="country AT regdomain ETSI" | |
| # debugging rc.d scripts | |
| #rc_debug=YES | |
| #rc_startmsgs=YES | |
| # Set dumpdev to "AUTO" to enable crash dumps, "NO" to disable | |
| dumpdev=AUTO | |
| ddb_enable=YES | |
| dumpon="-v" | |
| panicmail_enable=YES | |
| panicmail_autosubmit=YES | |
| savecore_enable=YES | |
| smartd_enable=YES | |
| h2o_enable=YES | |
| # nfs | |
| #mountd_enable=YES | |
| #mountd_flags="-n -r" | |
| #portmap_enable=YES | |
| #rpcbind_enable=YES | |
| #rpc_lockd_enable=YES | |
| #rpc_statd_enable=YES | |
| jail_enable=YES | |
| # BEGIN ANSIBLE MANAGED BLOCK | |
| # jail networks | |
| cloned_interfaces="${cloned_interfaces} lo1" | |
| ifconfig_lo1="inet 10.241.0.0/16" | |
| ifconfig_lo1_aliases="inet 10.241.0.0-15/16" | |
| # misc tweaks | |
| ip6addrctl_policy="ipv4_prefer" | |
| clear_tmp_enable=YES | |
| # END ANSIBLE MANAGED BLOCK | |
| # local jail networks | |
| # cloned_interfaces="${cloned_interfaces} lo2" | |
| # ifconfig_lo2_aliases="inet6 fcf9:b70a:3e2:8e50:6c98:cafe:1-15/80" | |
| # misc tweaks | |
| # iohyve | |
| # iovhye_enable=YES | |
| # iohyve_flags="kmod=1 net=igb0" | |
| jail_fqdn="wintermute.skunkwerks.at" | |
| devfs_system_ruleset="system" |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Copyright (c) 1992-2018 The FreeBSD Project. | |
| Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 | |
| The Regents of the University of California. All rights reserved. | |
| FreeBSD is a registered trademark of The FreeBSD Foundation. | |
| FreeBSD 12.0-CURRENT r335576+8a125fa67c5d(master) amd64 | |
| FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0) | |
| WARNING: WITNESS option enabled, expect reduced performance. | |
| VT(efifb): resolution 1280x1024 | |
| module_register: cannot register mmc/mmcsd from kernel; already loaded from mmcsd.ko | |
| Module mmc/mmcsd failed to register: 17 | |
| CPU: Intel(R) Xeon(R) CPU E5-2667 v4 @ 3.20GHz (3200.07-MHz K8-class CPU) | |
| Origin="GenuineIntel" Id=0x406f1 Family=0x6 Model=0x4f Stepping=1 | |
| Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> | |
| Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> | |
| AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> | |
| AMD Features2=0x121<LAHF,ABM,Prefetch> | |
| Structured Extended Features=0x21cbfbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,PQE,RDSEED,ADX,SMAP,PROCTRACE> | |
| XSAVE Features=0x1<XSAVEOPT> | |
| VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr | |
| TSC: P-state invariant, performance statistics | |
| real memory = 137434759168 (131068 MB) | |
| avail memory = 133677522944 (127484 MB) | |
| Event timer "LAPIC" quality 600 | |
| ACPI APIC Table: <SUPERM SMCI--MB> | |
| FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs | |
| FreeBSD/SMP: 1 package(s) x 8 core(s) x 2 hardware threads | |
| random: unblocking device. | |
| ioapic0 <Version 2.0> irqs 0-23 on motherboard | |
| ioapic1 <Version 2.0> irqs 24-47 on motherboard | |
| Launching APs: 1 8 5 2 10 14 3 4 15 11 7 12 13 9 6 | |
| Timecounter "TSC-low" frequency 1600033102 Hz quality 1000 | |
| random: entropy device external interface | |
| module_register_init: MOD_LOAD (vesa, 0xffffffff810ee680, 0) error 19 | |
| random: registering fast source Intel Secure Key RNG | |
| random: fast provider: "Intel Secure Key RNG" | |
| kbd1 at kbdmux0 | |
| netmap: loaded module | |
| [ath_hal] loaded | |
| nexus0 | |
| cryptosoft0: <software crypto> on motherboard | |
| acpi0: <SUPERM SMCI--MB> on motherboard | |
| Firmware Error (ACPI): Failure creating [\134_SB.NITL], AE_ALREADY_EXISTS (20180531/dswload2-468) | |
| ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180531/psobject-372) | |
| ACPI Error: Ignore error and continue table load (20180531/psobject-776) | |
| acpi0: Power Button (fixed) | |
| cpu0: <ACPI CPU> on acpi0 | |
| Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503) | |
| ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.SCK0.CP00._OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503) | |
| ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.PDC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.SCK0.CP00._PDC, AE_NOT_FOUND (20180531/psparse-677) | |
| Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503) | |
| ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.SCK0.CP01._OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503) | |
| ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.PDC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.SCK0.CP01._PDC, AE_NOT_FOUND (20180531/psparse-677) | |
| Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503) | |
| ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.SCK0.CP02._OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503) | |
| ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.PDC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.SCK0.CP02._PDC, AE_NOT_FOUND (20180531/psparse-677) | |
| Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503) | |
| ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.SCK0.CP03._OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503) | |
| ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.PDC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.SCK0.CP03._PDC, AE_NOT_FOUND (20180531/psparse-677) | |
| Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503) | |
| ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.SCK0.CP04._OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503) | |
| ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.PDC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.SCK0.CP04._PDC, AE_NOT_FOUND (20180531/psparse-677) | |
| Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503) | |
| ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.SCK0.CP05._OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503) | |
| ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.PDC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.SCK0.CP05._PDC, AE_NOT_FOUND (20180531/psparse-677) | |
| Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503) | |
| ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.SCK0.CP06._OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503) | |
| ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.PDC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.SCK0.CP06._PDC, AE_NOT_FOUND (20180531/psparse-677) | |
| Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503) | |
| ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.SCK0.CP07._OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503) | |
| ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.PDC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.SCK0.CP07._PDC, AE_NOT_FOUND (20180531/psparse-677) | |
| Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503) | |
| ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.SCK0.CP08._OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503) | |
| ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.PDC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.SCK0.CP08._PDC, AE_NOT_FOUND (20180531/psparse-677) | |
| Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503) | |
| ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.SCK0.CP09._OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503) | |
| ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.PDC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.SCK0.CP09._PDC, AE_NOT_FOUND (20180531/psparse-677) | |
| Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503) | |
| ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.SCK0.CP0A._OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503) | |
| ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.PDC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.SCK0.CP0A._PDC, AE_NOT_FOUND (20180531/psparse-677) | |
| Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503) | |
| ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.SCK0.CP0B._OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503) | |
| ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.PDC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.SCK0.CP0B._PDC, AE_NOT_FOUND (20180531/psparse-677) | |
| Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503) | |
| ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.SCK0.CP0C._OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503) | |
| ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.PDC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.SCK0.CP0C._PDC, AE_NOT_FOUND (20180531/psparse-677) | |
| Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503) | |
| ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.SCK0.CP0D._OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503) | |
| ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.PDC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.SCK0.CP0D._PDC, AE_NOT_FOUND (20180531/psparse-677) | |
| Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503) | |
| ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.SCK0.CP0E._OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503) | |
| ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.PDC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.SCK0.CP0E._PDC, AE_NOT_FOUND (20180531/psparse-677) | |
| Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503) | |
| ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.SCK0.CP0F._OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503) | |
| ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.PDC, AE_NOT_FOUND (20180531/psparse-677) | |
| ACPI Error: Method parse/execution failed \134_SB.SCK0.CP0F._PDC, AE_NOT_FOUND (20180531/psparse-677) | |
| atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0 | |
| atrtc0: registered as a time-of-day clock, resolution 1.000000s | |
| Event timer "RTC" frequency 32768 Hz quality 0 | |
| attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 | |
| Timecounter "i8254" frequency 1193182 Hz quality 0 | |
| Event timer "i8254" frequency 1193182 Hz quality 100 | |
| hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 | |
| Timecounter "HPET" frequency 14318180 Hz quality 950 | |
| Event timer "HPET" frequency 14318180 Hz quality 350 | |
| Event timer "HPET1" frequency 14318180 Hz quality 340 | |
| Event timer "HPET2" frequency 14318180 Hz quality 340 | |
| Event timer "HPET3" frequency 14318180 Hz quality 340 | |
| Event timer "HPET4" frequency 14318180 Hz quality 340 | |
| Event timer "HPET5" frequency 14318180 Hz quality 340 | |
| Event timer "HPET6" frequency 14318180 Hz quality 340 | |
| Event timer "HPET7" frequency 14318180 Hz quality 340 | |
| Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 | |
| acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 | |
| pcib0: <ACPI Host-PCI bridge> on acpi0 | |
| pci0: <ACPI PCI bus> on pcib0 | |
| pci0: <dasp, performance counters> at device 11.1 (no driver attached) | |
| pci0: <dasp, performance counters> at device 11.2 (no driver attached) | |
| pci0: <dasp, performance counters> at device 16.1 (no driver attached) | |
| pci0: <dasp, performance counters> at device 16.6 (no driver attached) | |
| pci0: <dasp, performance counters> at device 18.1 (no driver attached) | |
| acpi_syscontainer0: <System Container> on acpi0 | |
| pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 | |
| pci1: <ACPI PCI bus> on pcib1 | |
| pcib2: <ACPI PCI-PCI bridge> irq 26 at device 1.0 on pci1 | |
| pci2: <ACPI PCI bus> on pcib2 | |
| nvme0: <Generic NVMe Device> mem 0xfb520000-0xfb523fff irq 26 at device 0.0 on pci2 | |
| pcib3: <ACPI PCI-PCI bridge> irq 40 at device 3.0 on pci1 | |
| pci3: <ACPI PCI bus> on pcib3 | |
| vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xfa000000-0xfaffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff irq 40 at device 0.0 on pci3 | |
| vgapci0: Boot video device | |
| hdac0: <NVIDIA (0x0fb9) HDA Controller> mem 0xfb080000-0xfb083fff irq 44 at device 0.1 on pci3 | |
| pci1: <unknown> at device 17.0 (no driver attached) | |
| ahci0: <Intel Wellsburg AHCI SATA controller> port 0xf110-0xf117,0xf100-0xf103,0xf0f0-0xf0f7,0xf0e0-0xf0e3,0xf020-0xf03f mem 0xfb61c000-0xfb61c7ff irq 16 at device 17.4 on pci1 | |
| ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported | |
| ahcich0: <AHCI channel> at channel 0 on ahci0 | |
| ahcich1: <AHCI channel> at channel 1 on ahci0 | |
| ahcich2: <AHCI channel> at channel 2 on ahci0 | |
| ahcich3: <AHCI channel> at channel 3 on ahci0 | |
| ahciem0: <AHCI enclosure management bridge> on ahci0 | |
| xhci0: <Intel Wellsburg USB 3.0 controller> mem 0xfb600000-0xfb60ffff irq 19 at device 20.0 on pci1 | |
| xhci0: 32 bytes context size, 64-bit DMA | |
| usbus0 on xhci0 | |
| usbus0: 5.0Gbps Super Speed USB v3.0 | |
| ehci0: <Intel Wellsburg USB 2.0 controller> mem 0xfb618000-0xfb6183ff irq 18 at device 26.0 on pci1 | |
| usbus1: EHCI version 1.0 | |
| usbus1 on ehci0 | |
| usbus1: 480Mbps High Speed USB v2.0 | |
| hdac1: <Intel Wellsburg HDA Controller> mem 0xfb610000-0xfb613fff irq 22 at device 27.0 on pci1 | |
| pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci1 | |
| pci4: <ACPI PCI bus> on pcib4 | |
| xhci1: <ASMedia ASM1042A USB 3.0 controller> mem 0xfb400000-0xfb407fff irq 16 at device 0.0 on pci4 | |
| xhci1: 32 bytes context size, 64-bit DMA | |
| xhci1: Unable to map MSI-X table | |
| usbus2 on xhci1 | |
| usbus2: 5.0Gbps Super Speed USB v3.0 | |
| pcib5: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci1 | |
| pci5: <ACPI PCI bus> on pcib5 | |
| igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xd000-0xd01f mem 0xfb300000-0xfb37ffff,0xfb380000-0xfb383fff irq 18 at device 0.0 on pci5 | |
| igb0: attach_pre capping queues at 4 | |
| igb0: using 1024 tx descriptors and 1024 rx descriptors | |
| igb0: msix_init qsets capped at 4 | |
| igb0: pxm cpus: 8 queue msgs: 4 admincnt: 1 | |
| igb0: using 4 rx queues 4 tx queues | |
| igb0: Using MSIX interrupts with 5 vectors | |
| igb0: allocated for 4 tx_queues | |
| igb0: allocated for 4 rx_queues | |
| igb0: Ethernet address: ac:1f:6b:15:2d:78 | |
| igb0: netmap queues/slots: TX 4/1024, RX 4/1024 | |
| pcib6: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci1 | |
| pci6: <ACPI PCI bus> on pcib6 | |
| igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xc000-0xc01f mem 0xfb200000-0xfb27ffff,0xfb280000-0xfb283fff irq 19 at device 0.0 on pci6 | |
| igb1: attach_pre capping queues at 4 | |
| igb1: using 1024 tx descriptors and 1024 rx descriptors | |
| igb1: msix_init qsets capped at 4 | |
| igb1: pxm cpus: 8 queue msgs: 4 admincnt: 1 | |
| igb1: using 4 rx queues 4 tx queues | |
| igb1: Using MSIX interrupts with 5 vectors | |
| igb1: allocated for 4 tx_queues | |
| igb1: allocated for 4 rx_queues | |
| igb1: Ethernet address: ac:1f:6b:15:2d:79 | |
| igb1: netmap queues/slots: TX 4/1024, RX 4/1024 | |
| pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci1 | |
| pci7: <ACPI PCI bus> on pcib7 | |
| xhci2: <ASMedia ASM1042A USB 3.0 controller> mem 0xfb100000-0xfb107fff irq 16 at device 0.0 on pci7 | |
| xhci2: 32 bytes context size, 64-bit DMA | |
| xhci2: Unable to map MSI-X table | |
| usbus3 on xhci2 | |
| usbus3: 5.0Gbps Super Speed USB v3.0 | |
| pcib8: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci1 | |
| pci8: <ACPI PCI bus> on pcib8 | |
| pcib9: <ACPI PCI-PCI bridge> at device 0.0 on pci8 | |
| pci9: <ACPI PCI bus> on pcib9 | |
| vgapci1: <VGA-compatible display> port 0xb000-0xb07f mem 0xf8000000-0xf8ffffff,0xf9000000-0xf901ffff irq 18 at device 0.0 on pci9 | |
| pcib10: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci1 | |
| pci10: <ACPI PCI bus> on pcib10 | |
| pcib11: <ACPI PCI-PCI bridge> irq 19 at device 0.0 on pci10 | |
| pci11: <ACPI PCI bus> on pcib11 | |
| pcib12: <PCI-PCI bridge> irq 18 at device 3.0 on pci11 | |
| pci12: <PCI bus> on pcib12 | |
| pcib13: <PCI-PCI bridge> irq 18 at device 7.0 on pci11 | |
| pci13: <PCI bus> on pcib13 | |
| ehci1: <Intel Wellsburg USB 2.0 controller> mem 0xfb617000-0xfb6173ff irq 18 at device 29.0 on pci1 | |
| usbus4: EHCI version 1.0 | |
| usbus4 on ehci1 | |
| usbus4: 480Mbps High Speed USB v2.0 | |
| isab0: <PCI-ISA bridge> at device 31.0 on pci1 | |
| isa0: <ISA bus> on isab0 | |
| ahci1: <Intel Wellsburg AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf000-0xf01f mem 0xfb616000-0xfb6167ff irq 16 at device 31.2 on pci1 | |
| ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported | |
| ahcich4: <AHCI channel> at channel 0 on ahci1 | |
| ahcich5: <AHCI channel> at channel 1 on ahci1 | |
| ahcich6: <AHCI channel> at channel 2 on ahci1 | |
| ahcich7: <AHCI channel> at channel 3 on ahci1 | |
| ahcich8: <AHCI channel> at channel 4 on ahci1 | |
| ahcich9: <AHCI channel> at channel 5 on ahci1 | |
| ahciem1: <AHCI enclosure management bridge> on ahci1 | |
| acpi_button0: <Power Button> on acpi0 | |
| uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 | |
| uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 | |
| atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 | |
| atkbd0: <AT Keyboard> irq 1 on atkbdc0 | |
| kbd0 at atkbd0 | |
| atkbd0: [GIANT-LOCKED] | |
| atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. | |
| coretemp0: <CPU On-Die Thermal Sensors> on cpu0 | |
| est0: <Enhanced SpeedStep Frequency Control> on cpu0 | |
| fuse-freebsd: version 0.4.4, FUSE ABI 7.8 | |
| ZFS filesystem version: 5 | |
| ZFS storage pool version: features support (5000) | |
| Timecounters tick every 1.000 msec | |
| ugen4.1: <Intel EHCI root HUB> at usbus4 | |
| ugen3.1: <0x1b21 XHCI root HUB> at usbus3 | |
| ugen0.1: <0x8086 XHCI root HUB> at usbus0 | |
| ugen1.1: <Intel EHCI root HUB> at usbus1 | |
| ugen2.1: <0x1b21 XHCI root HUB> at usbus2 | |
| uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 | |
| uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 | |
| uhub2: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 | |
| uhub3: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus3 | |
| uhub4: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 | |
| nvd0: <PLEXTOR PX-1TM8PeY> NVMe namespace | |
| nvd0: 976762MB (2000409264 512 byte sectors) | |
| hdacc0: <NVIDIA (0x0080) HDA CODEC> at cad 0 on hdac0 | |
| hdaa0: <NVIDIA (0x0080) Audio Function Group> at nid 1 on hdacc0 | |
| pcm0: <NVIDIA (0x0080) (HDMI/DP 8ch)> at nid 4 on hdaa0 | |
| pcm1: <NVIDIA (0x0080) (HDMI/DP 8ch)> at nid 5 on hdaa0 | |
| pcm2: <NVIDIA (0x0080) (HDMI/DP 8ch)> at nid 6 on hdaa0 | |
| hdacc1: <Realtek ALC1150 HDA CODEC> at cad 0 on hdac1 | |
| hdaa1: <Realtek ALC1150 Audio Function Group> at nid 1 on hdacc1 | |
| pcm3: <Realtek ALC1150 (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa1 | |
| pcm4: <Realtek ALC1150 (Front Analog)> at nid 27 and 25 on hdaa1 | |
| pcm5: <Realtek ALC1150 (Rear Digital)> at nid 30 on hdaa1 | |
| ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 | |
| ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device | |
| ses0: SEMB SES Device | |
| cd0 at ahcich6 bus 0 scbus7 target 0 lun 0 | |
| cd0: <TSSTcorp CDDVDW SH-224GB SB00> Removable CD-ROM SCSI device | |
| cd0: Serial Number S1DK6YAH4008DR | |
| cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) | |
| cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed | |
| ses1 at ahciem1 bus 0 scbus11 target 0 lun 0 | |
| ses1: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device | |
| ses1: SEMB SES Device | |
| ada0 at ahcich4 bus 0 scbus5 target 0 lun 0 | |
| ada0: <HGST HUS726040ALN610 APGNT907> ACS-2 ATA SATA 3.x device | |
| ada0: Serial Number N8H2KZPZ | |
| ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) | |
| ada0: Command Queueing enabled | |
| ada0: 3815447MB (976754646 4096 byte sectors) | |
| ada1 at ahcich5 bus 0 scbus6 target 0 lun 0 | |
| ada1: <HGST HUS726040ALN610 APGNT907> ACS-2 ATA SATA 3.x device | |
| ada1: Serial Number N8H2W67Z | |
| ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) | |
| ada1: Command Queueing enabled | |
| ada1: 3815447MB (976754646 4096 byte sectors) | |
| WARNING: WITNESS option enabled, expect reduced performance. | |
| Trying to mount root from zfs:envy/ROOT/12.0-CURRENT-20180623.031711 []... | |
| uhub2: 4 ports with 4 removable, self powered | |
| uhub3: 4 ports with 4 removable, self powered | |
| Root mount waiting for: usbus4 usbus3 usbus1 usbus0 | |
| uhub0: 2 ports with 2 removable, self powered | |
| uhub1: 2 ports with 2 removable, self powered | |
| ugen3.2: <Razer Razer DeathAdder> at usbus3 | |
| uhub4: 21 ports with 21 removable, self powered | |
| ugen0.2: <USB Device USB 2.0 Hub> at usbus0 | |
| uhub5 on uhub4 | |
| uhub5: <USB Device USB 2.0 Hub, class 9/0, rev 2.00/0.00, addr 1> on usbus0 | |
| ugen4.2: <vendor 0x8087 product 0x8002> at usbus4 | |
| uhub6 on uhub0 | |
| uhub6: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus4 | |
| ugen1.2: <vendor 0x8087 product 0x800a> at usbus1 | |
| uhub7 on uhub1 | |
| uhub7: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus1 | |
| Root mount waiting for: usbus4 usbus1 usbus0 | |
| uhub7: 6 ports with 6 removable, self powered | |
| uhub6: 8 ports with 8 removable, self powered | |
| uhub5: 4 ports with 4 removable, self powered | |
| ugen0.3: <Chord Electronics Ltd Mojo> at usbus0 | |
| uaudio0 on uhub5 | |
| uaudio0: <Chord Electronics Ltd Mojo, class 239/2, rev 2.00/1.97, addr 2> on usbus0 | |
| uaudio0: Play: 384000 Hz, 2 ch, 32-bit S-LE PCM format, 2x8ms buffer. | |
| uaudio0: Play: 352800 Hz, 2 ch, 32-bit S-LE PCM format, 2x8ms buffer. | |
| uaudio0: Play: 192000 Hz, 2 ch, 32-bit S-LE PCM format, 2x8ms buffer. | |
| uaudio0: Play: 176400 Hz, 2 ch, 32-bit S-LE PCM format, 2x8ms buffer. | |
| uaudio0: Play: 96000 Hz, 2 ch, 32-bit S-LE PCM format, 2x8ms buffer. | |
| uaudio0: Play: 88200 Hz, 2 ch, 32-bit S-LE PCM format, 2x8ms buffer. | |
| uaudio0: Play: 48000 Hz, 2 ch, 32-bit S-LE PCM format, 2x8ms buffer. | |
| uaudio0: Play: 44100 Hz, 2 ch, 32-bit S-LE PCM format, 2x8ms buffer. | |
| uaudio0: Play: 32000 Hz, 2 ch, 32-bit S-LE PCM format, 2x8ms buffer. | |
| uaudio0: No recording. | |
| uaudio0: No MIDI sequencer. | |
| pcm6: <USB audio> on uaudio0 | |
| uaudio0: No HID volume keys found. | |
| Root mount waiting for: usbus0 | |
| ugen0.4: <vendor 0x04d9 USB Keyboard> at usbus0 | |
| ukbd0 on uhub4 | |
| ukbd0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/12.09, addr 3> on usbus0 | |
| kbd2 at ukbd0 | |
| Root mount waiting for: usbus0 | |
| ugen0.5: <Plantronics Plantronics Headset> at usbus0 | |
| uaudio1 on uhub4 | |
| uaudio1: <Plantronics Plantronics Headset, class 0/0, rev 1.10/0.04, addr 4> on usbus0 | |
| uaudio1: Play: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. | |
| uaudio1: Play: 44100 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. | |
| uaudio1: Play: 40000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. | |
| uaudio1: Play: 32000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. | |
| uaudio1: Play: 24000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. | |
| uaudio1: Play: 22050 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. | |
| uaudio1: Play: 16000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. | |
| uaudio1: Play: 11025 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. | |
| uaudio1: Play: 8000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. | |
| uaudio1: Record: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. | |
| uaudio1: Record: 44100 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. | |
| uaudio1: Record: 40000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. | |
| uaudio1: Record: 32000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. | |
| uaudio1: Record: 24000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. | |
| uaudio1: Record: 22050 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. | |
| uaudio1: Record: 16000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. | |
| uaudio1: Record: 11025 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. | |
| uaudio1: Record: 8000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. | |
| uaudio1: No MIDI sequencer. | |
| pcm7: <USB audio> on uaudio1 | |
| uaudio1: HID volume keys found. | |
| ugen0.6: <vendor 0x0557 product 0x7000> at usbus0 | |
| uhub8 on uhub4 | |
| uhub8: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr 5> on usbus0 | |
| Root mount waiting for: usbus0 | |
| uhub8: 4 ports with 3 removable, self powered | |
| ugen0.7: <vendor 0x0557 product 0x2419> at usbus0 | |
| ukbd1 on uhub8 | |
| ukbd1: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 6> on usbus0 | |
| kbd3 at ukbd1 | |
| [11] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-2224:post-docs-buildchain, error=63) | |
| [12] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-2224:post-visualstudio2013, error=63) | |
| [12] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-1548:with-couch-tools, error=63) | |
| [14] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-2224:pre-pip-sphinxp1, error=63) | |
| [14] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-2224:pre-pip-sphinxp2, error=63) | |
| [14] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-2224:pre-pip-sphinxp3, error=63) | |
| [14] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-2224:post-docs-buildchainp1, error=63) | |
| [14] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-2224:post-docs-buildchainp2, error=63) | |
| [14] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-2224:post-docs-buildchainp3, error=63) | |
| [14] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-1031:post-firstbootp1, error=63) | |
| [14] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-1031:post-firstbootp2, error=63) | |
| [14] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-1031:post-firstbootp3, error=63) | |
| [14] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-2224:post-visualstudio2013p1, error=63) | |
| [14] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-2224:post-visualstudio2013p2, error=63) | |
| [14] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-2224:post-visualstudio2013p3, error=63) | |
| [14] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-1548:with-couch-toolsp1, error=63) | |
| [14] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-1548:with-couch-toolsp2, error=63) | |
| [14] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-1548:with-couch-toolsp3, error=63) | |
| [14] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-1352:with-chocolateyp1, error=63) | |
| [14] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-1352:with-chocolateyp2, error=63) | |
| [14] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-1352:with-chocolateyp3, error=63) | |
| [22] nvidia0: <GeForce GTX 1050 Ti> on vgapci0 | |
| [22] vgapci0: child nvidia0 requested pci_enable_io | |
| [22] vgapci0: child nvidia0 requested pci_enable_io | |
| [22] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 390.59 Wed May 9 21:54:48 PDT 2018 | |
| [22] acquiring duplicate lock of same type: "os.lock_sx" | |
| [22] 1st os.lock_sx @ nvidia_os.c:651 | |
| [22] 2nd os.lock_sx @ nvidia_os.c:651 | |
| [22] stack backtrace: | |
| [22] #0 0xffffffff80bfb893 at witness_debugger+0x73 | |
| [22] #1 0xffffffff80bfb714 at witness_checkorder+0xe34 | |
| [22] #2 0xffffffff80b9a748 at _sx_xlock+0x68 | |
| [22] #3 0xffffffff83eced02 at os_acquire_mutex+0x32 | |
| [22] #4 0xffffffff83dca3a6 at _nv032841rm+0x16 | |
| [23] ipmi0: <IPMI System Interface> port 0xca2,0xca3 on acpi0 | |
| [23] ipmi0: KCS mode found at io 0xca2 on acpi | |
| [23] ipmi0: IPMI device rev. 1, firmware rev. 3.45, version 2.0, device support mask 0xbf | |
| [23] ipmi0: Number of channels 2 | |
| [23] ipmi0: Attached watchdog | |
| [23] ipmi0: Establishing power cycle handler | |
| [26] ichsmb0: <Intel Wellsburg SMBus controller> port 0x580-0x59f mem 0xfb615000-0xfb6150ff irq 18 at device 31.3 on pci1 | |
| [26] smbus0: <System Management Bus> on ichsmb0 | |
| [26] smb0: <SMBus generic I/O> on smbus0 | |
| [26] Cuse v0.1.35 @ /dev/cuse | |
| [27] lo0: link state changed to UP | |
| [27] lo1: link state changed to UP | |
| [30] ums0 on uhub3 | |
| [30] ums0: <Razer Razer DeathAdder, class 0/0, rev 2.00/1.00, addr 1> on usbus3 | |
| [30] ums0: 7 buttons and [XYZ] coordinates ID=0 | |
| [30] uhid0 on uhub4 | |
| [30] uhid0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/12.09, addr 3> on usbus0 | |
| [30] ums1 on uhub8 | |
| [30] ums1: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 6> on usbus0 | |
| [30] ums1: 3 buttons and [Z] coordinates ID=0 | |
| [30] pflog0: promiscuous mode enabled | |
| [31] Link state changed to up | |
| [31] igb0: link state changed to UP | |
| [33] CPU: Intel(R) Xeon(R) CPU E5-2667 v4 @ 3.20GHz (3200.07-MHz K8-class CPU) | |
| [33] Origin="GenuineIntel" Id=0x406f1 Family=0x6 Model=0x4f Stepping=1 | |
| [33] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> | |
| [33] Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> | |
| [33] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> | |
| [33] AMD Features2=0x121<LAHF,ABM,Prefetch> | |
| [33] Structured Extended Features=0x21cbfbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,PQE,RDSEED,ADX,SMAP,PROCTRACE> | |
| [33] XSAVE Features=0x1<XSAVEOPT> | |
| [33] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr | |
| [33] TSC: P-state invariant, performance statistics |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| sudo sysctl hw.model hw.ncpu hw.acpi.cpu hw.vmm dev.cpu.0 | |
| hw.model: Intel(R) Xeon(R) CPU E5-2667 v4 @ 3.20GHz | |
| hw.ncpu: 16 | |
| hw.acpi.cpu.cx_lowest: C1 | |
| hw.vmm.amdvi.domain_id: 0 | |
| hw.vmm.amdvi.disable_io_fault: 0 | |
| hw.vmm.amdvi.ptp_level: 4 | |
| hw.vmm.amdvi.host_ptp: 1 | |
| hw.vmm.amdvi.enable: 0 | |
| hw.vmm.amdvi.count: 0 | |
| hw.vmm.npt.pmap_flags: 0 | |
| hw.vmm.svm.num_asids: 0 | |
| hw.vmm.svm.disable_npf_assist: 0 | |
| hw.vmm.svm.features: 4294967295 | |
| hw.vmm.svm.vmcb_clean: 1023 | |
| hw.vmm.vmx.vpid_alloc_failed: 0 | |
| hw.vmm.vmx.posted_interrupt_vector: 252 | |
| hw.vmm.vmx.cap.posted_interrupts: 1 | |
| hw.vmm.vmx.cap.virtual_interrupt_delivery: 1 | |
| hw.vmm.vmx.cap.invpcid: 1 | |
| hw.vmm.vmx.cap.monitor_trap: 1 | |
| hw.vmm.vmx.cap.unrestricted_guest: 1 | |
| hw.vmm.vmx.cap.pause_exit: 1 | |
| hw.vmm.vmx.cap.halt_exit: 1 | |
| hw.vmm.vmx.initialized: 1 | |
| hw.vmm.vmx.cr4_zeros_mask: 18446744073705920512 | |
| hw.vmm.vmx.cr4_ones_mask: 8192 | |
| hw.vmm.vmx.cr0_zeros_mask: 18446744071025197056 | |
| hw.vmm.vmx.cr0_ones_mask: 32 | |
| hw.vmm.vmx.no_flush_rsb: 0 | |
| hw.vmm.ept.pmap_flags: 1531 | |
| hw.vmm.vrtc.flag_broken_time: 1 | |
| hw.vmm.ppt.devices: 0 | |
| hw.vmm.iommu.enable: 1 | |
| hw.vmm.iommu.initialized: 0 | |
| hw.vmm.bhyve_xcpuids: 0 | |
| hw.vmm.topology.cpuid_leaf_b: 1 | |
| hw.vmm.create: beavis | |
| hw.vmm.destroy: beavis | |
| hw.vmm.trace_guest_exceptions: 0 | |
| hw.vmm.ipinum: 251 | |
| hw.vmm.halt_detection: 1 | |
| dev.cpu.0.cx_method: C1/mwait/hwc C2/mwait/hwc/bma | |
| dev.cpu.0.cx_usage_counters: 401406 0 | |
| dev.cpu.0.cx_usage: 100.00% 0.00% last 1045us | |
| dev.cpu.0.cx_lowest: C1 | |
| dev.cpu.0.cx_supported: C1/1/1 C2/2/41 | |
| dev.cpu.0.freq_levels: 3201/135000 3200/135000 3100/128128 2900/117391 2800/112170 2600/102018 2500/97087 2300/86296 2200/81662 2100/77122 1900/68315 1800/64049 1600/55784 1500/50680 1300/42969 1200/39241 | |
| dev.cpu.0.freq: 3200 | |
| dev.cpu.0.temperature: 34.0C | |
| dev.cpu.0.coretemp.throttle_log: 0 | |
| dev.cpu.0.coretemp.tjmax: 102.0C | |
| dev.cpu.0.coretemp.resolution: 1 | |
| dev.cpu.0.coretemp.delta: 68 | |
| dev.cpu.0.%parent: acpi0 | |
| dev.cpu.0.%pnpinfo: _HID=ACPI0007 _UID=0 | |
| dev.cpu.0.%location: handle=\_SB_.SCK0.CP00 _PXM=0 | |
| dev.cpu.0.%driver: cpu | |
| dev.cpu.0.%desc: ACPI CPU |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| igb0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 | |
| options=e501bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> | |
| ether ac:1f:6b:15:2d:78 | |
| inet6 fe80::ae1f:6bff:fe15:2d78%igb0 prefixlen 64 scopeid 0x1 | |
| inet 172.16.1.14 netmask 0xffffff00 broadcast 172.16.1.255 | |
| nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL> | |
| media: Ethernet autoselect (1000baseT <full-duplex>) | |
| status: active | |
| igb1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 | |
| options=e505bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,LRO,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> | |
| ether ac:1f:6b:15:2d:79 | |
| nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> | |
| media: Ethernet autoselect | |
| status: no carrier | |
| lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 | |
| options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> | |
| inet6 ::1 prefixlen 128 | |
| inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 | |
| inet 127.0.0.1 netmask 0xff000000 | |
| nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> | |
| groups: lo | |
| lo1: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 | |
| options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> | |
| inet 10.241.0.0 netmask 0xffff0000 | |
| inet 10.241.0.1 netmask 0xffffffff | |
| inet 10.241.0.2 netmask 0xffffffff | |
| inet 10.241.0.3 netmask 0xffffffff | |
| inet 10.241.0.4 netmask 0xffffffff | |
| inet 10.241.0.5 netmask 0xffffffff | |
| inet 10.241.0.6 netmask 0xffffffff | |
| inet 10.241.0.7 netmask 0xffffffff | |
| inet 10.241.0.8 netmask 0xffffffff | |
| inet 10.241.0.9 netmask 0xffffffff | |
| inet 10.241.0.10 netmask 0xffffffff | |
| inet 10.241.0.11 netmask 0xffffffff | |
| inet 10.241.0.12 netmask 0xffffffff | |
| inet 10.241.0.13 netmask 0xffffffff | |
| inet 10.241.0.14 netmask 0xffffffff | |
| inet 10.241.0.15 netmask 0xffffffff | |
| nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> | |
| groups: lo | |
| pflog0: flags=141<UP,RUNNING,PROMISC> metric 0 mtu 33160 | |
| groups: pflog | |
| bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 | |
| description: vm-public | |
| ether 02:37:62:ce:b3:00 | |
| nd6 options=1<PERFORMNUD> | |
| groups: bridge | |
| id 00:00:00:00:00:00 priority 0 hellotime 2 fwddelay 15 | |
| maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200 | |
| root id 00:00:00:00:00:00 priority 0 ifcost 0 port 0 | |
| member: igb0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP> | |
| ifmaxaddr 0 port 1 priority 128 path cost 20000 |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # ensure only gpt labelled devices are used | |
| kern.geom.label.disk_ident.enable="0" | |
| kern.geom.label.gptid.enable="0" | |
| zfs_load="YES" | |
| # https://www.freebsd.org/security/advisories/FreeBSD-SA-18%3A03.speculative_execution.asc | |
| # meltdown | |
| vm.pmap.pti=1 | |
| # spectre v2 - requires microcode update | |
| # check with hw.ibrs_active at runtime | |
| hw.ibrs_disable=0 | |
| # serial over ipmi | |
| #boot_multicons="YES" | |
| #boot_serial="YES" | |
| #console="comconsole,efi" | |
| #comconsole_port="0x248" | |
| #hint.uart.0.flags="0x00" | |
| #hint.uart.2.flags="0x10" | |
| # boot_verbose="YES" | |
| # nextbsd graphics debugging | |
| debug.debugger_on_panic=1 | |
| #dev.drm.skip_ddb=1 | |
| # dev.drm.drm_debug_persist=1 | |
| # set this at runtime after switching to X | |
| # dev.drm.drm_debug=-1 | |
| # nvidia graphics | |
| # nvidia-modeset_load="YES" | |
| # kernel tweaks | |
| kern.ipc.shmseg=1024 | |
| kern.ipc.shmni=1024 | |
| kern.maxproc=10000 | |
| # storage bits | |
| mmc_load="YES" | |
| mmcsd_load="YES" | |
| sdhci_load="YES" | |
| fuse_load="YES" | |
| # hw | |
| coretemp_load="YES" | |
| # filesystems | |
| tmpfs_load="YES" | |
| aio_load="YES" | |
| # unicode | |
| libiconv_load="YES" | |
| libmchain_load="YES" | |
| cd9660_iconv_load="YES" | |
| msdosfs_iconv_load="YES" | |
| # console | |
| kern.vty=vt | |
| hw.vga.textmode=1 | |
| # sound | |
| # all loaded by default on amd64 | |
| # snd_hda_load="YES" | |
| # legal.realtek.license_ack=1 | |
| snd_uaudio_load="YES" | |
| # chromium | |
| kern.ipc.shm_allow_removed=1 | |
| # cpu/gpu power tuning | |
| drm.i915.enable_rc6=7 | |
| # kern.hz=100 | |
| debug.cpufreq.lowest=600 | |
| hint.p4tcc.0.disabled="1" | |
| hint.acpi_throttle.0.disabled="1" | |
| # bhyve | |
| vmm_load="YES" | |
| nmdm_load="YES" | |
| if_tap_load="YES" | |
| kern.racct.enable=1 | |
| # fool windows VMs into seeing cpus as cores | |
| hw.vmm.topology.cores_per_package=4 |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| BATCH=yes | |
| DEVELOPER=yes | |
| PROXYDEPS_FATAL=yes | |
| KEEP_OLD_PACKAGES=yes | |
| USE_TMPFS=all | |
| TMPFS_LIMIT=2 | |
| WRKDIRPREFIX=/tmp | |
| CCACHE_DIR=/var/cache/ccache | |
| # Erlang/OTP with DTrace | |
| STRIP= | |
| WITH_CTF=1 | |
| CFLAGS+=-fno-omit-frame-pointer | |
| # OpenSSL avoidance | |
| # DEFAULT_VERSIONS+=ssl=libressl | |
| # OPTIONS_UNSET= GSSAPI_BASE | |
| # OPTIONS_SET= GSSAPI_MIT | |
| # enable our custom ports category | |
| VALID_CATEGORIES+=koan-ci | |
| LICENSES_ACCEPTED+=MIT BSD3CLAUSE APACHE20 LGPLV3 BSD2CLAUSE MPL MPL20 NONE | |
| # Enable Tahoma in x11-fonts/webfonts if you have a Windows license | |
| .if ${.CURDIR:M*/x11-fonts/webfonts} | |
| WITH_MSWINDOWS_LICENSE=yes | |
| .endif |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # /etc/pf.conf | |
| # macros | |
| protocols = "{ tcp, udp }" | |
| blocked_ports = "{ syslog, epmd, amqp, couchdb }" | |
| tcp_services = "{ domain, http, https, smtp, 2200, couchdb, amqp, 1978, 3389, 6600, 9000 }" | |
| udp_services = "{ domain, 9993, 10001, 21027, 3478 }" | |
| plex_ports = "{ 32400, 1900, 3005, 5353, 8324, 32469, 32410, 32412, 32413, 32414 }" | |
| koan_services = "{ https, amqp, 1999 }" | |
| martians = "{ 127.0.0.0/8, 192.168.0.0/16, \ | |
| 10.0.0.0/8, 169.254.0.0/16, 192.0.2.0/24, \ | |
| 0.0.0.0/8, 240.0.0.0/4 }" | |
| dhcp = "{ bootpc, bootps }" | |
| # interfaces | |
| extl_if = "igb0" | |
| intl_if = "lo0" | |
| jail_if = "lo1" | |
| hive_if = "tap0" | |
| zero_if = "zt1flo98dm17np8" | |
| iwmn_if = "zt1flo98dm0peka" | |
| bridge = "{ tap0, igb0 }" | |
| # networks | |
| internet = $extl_if:network | |
| intl_net = $intl_if:network | |
| jail_net = $jail_if:network | |
| hive_net = $hive_if:network | |
| #zero_net = $zero_if:network | |
| #iwmn_net = $iwmn_if:network | |
| zero_net = "{ 10.144.0.0/16, fc36:c375:a2e2::/40 }" | |
| iwmn_net = "10.244.0.0/16" | |
| local_net= "172.16.0.0/16" | |
| # limits | |
| # bigger state tables help erlang receive sockets faster | |
| # https://blog.tyk.nu/blog/fun-with-freebsd-listen-queue-overflow/ | |
| set limit { states 200000, frags 40000, src-nodes 40000 } | |
| set timeout { adaptive.start 180000, adaptive.end 200000 } | |
| # trusted nets and devices | |
| set skip on { $intl_if, $jail_if, $hive_if } | |
| set skip on { $zero_if, $iwmn_if } | |
| # tables | |
| table <badhosts> persist file "/etc/pf.blocklist" | |
| # clean packets are happy packets | |
| scrub in all | |
| # jails are allowed outbound connections but not inbound | |
| # these should be set up explicitly using spiped or similar | |
| nat on $extl_if proto $protocols from $jail_net to any -> ($extl_if:0) | |
| nat on $extl_if proto $protocols from $zero_net to any -> ($extl_if:0) | |
| nat on $extl_if proto $protocols from $iwmn_net to any -> ($extl_if:0) | |
| # block by default | |
| block in log all | |
| # plex https://support.plex.tv/hc/en-us/articles/201543147-What-network-ports-do-I-need-to-allow-through-my-firewall- | |
| # but allow legit internal traffic | |
| pass in quick on $extl_if proto { udp } from any to $extl_if port $udp_services | |
| pass in quick on $extl_if proto { tcp } from any to $extl_if port $tcp_services | |
| pass in quick on $extl_if proto { tcp } from any to $extl_if port $koan_services | |
| pass in quick on $extl_if from $local_net to $extl_if | |
| pass in quick on $extl_if proto { udp, tcp } from $local_net to any port $plex_ports | |
| pass in quick on $extl_if proto { udp, tcp } from $local_net to any port $udp_services | |
| # dhcp for bridged bhyve instances | |
| pass in quick on $bridge proto udp from any port $dhcp to any port $dhcp | |
| pass out quick on $bridge proto udp from any port $dhcp to any port $dhcp | |
| # you shall not pass | |
| block drop in quick on $extl_if from $martians to any | |
| block drop out quick on $extl_if from any to $martians | |
| block drop in quick on $extl_if proto { udp, tcp } from any to any port $blocked_ports | |
| # handle script kiddies and other nasties on demand | |
| block drop in quick on $extl_if from <badhosts> to any | |
| # o ye of little faith | |
| # pass in log all | |
| # bhyve gets everything | |
| # pass in quick on $extl_if from any to $hive_if | |
| pass out all |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # ansible_managed | |
| hostname="wintermute.skunkwerks.at" | |
| # kernel | |
| kld_list="linux64 fuse nvidia-modeset ipmi smb ichsmb dtraceall cc_htcp filemon cuse" | |
| update_motd=YES | |
| # daemons | |
| zfs_enable="YES" | |
| sendmail_enable="NONE" | |
| local_unbound_enable="NO" | |
| # network | |
| gateway_enable=YES #for ipv4 | |
| ipv6_gateway_enable=YES #for ipv6 | |
| ifconfig_igb0="DHCP" | |
| ifconfig_igb0_ipv6="inet6 accept_rtadv" | |
| ifconfig_ue0="DHCP" | |
| ifconfig_ue0_ipv6="inet6 accept_rtadv" | |
| # Set dumpdev to "AUTO" to enable crash dumps, "NO" to disable | |
| dumpdev=AUTO | |
| ddb_enable=YES | |
| dumpon="-v" | |
| panicmail_enable=YES | |
| panicmail_autosubmit=YES | |
| savecore_enable=YES | |
| smartd_enable=YES | |
| h2o_enable=YES | |
| # nfs | |
| jail_enable=YES | |
| # BEGIN ANSIBLE MANAGED BLOCK | |
| # jail networks | |
| cloned_interfaces="${cloned_interfaces} lo1" | |
| ifconfig_lo1="inet 10.241.0.0/16" | |
| ifconfig_lo1_aliases="inet 10.241.0.0-15/16" | |
| # misc tweaks | |
| ip6addrctl_policy="ipv4_prefer" | |
| clear_tmp_enable=YES | |
| # END ANSIBLE MANAGED BLOCK | |
| devfs_system_ruleset="system" |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| WITH_META_MODE=yes |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| WITH_CCACHE_BUILD=yes | |
| WITHOUT_LIB32=yes | |
| WITH_REPRODUCIBLE_BUILD=yes | |
| WITH_BSD_GREP=yes | |
| WITH_LOADER_LUA=yes | |
| WITHOUT_FORTH=yes | |
| WITHOUT_DEBUG_FILES=yes | |
| WITHOUT_FLOPPY=yes | |
| WITHOUT_FINGER=yes | |
| #WITHOUT_FTP=yes | |
| WITHOUT_GAMES=yes | |
| WITHOUT_HAST=yes | |
| WITHOUT_HYPERV=yes | |
| #WITHOUT_IPFILTER=yes | |
| #WITHOUT_IPFW=yes | |
| WITHOUT_SENDMAIL=yes | |
| WITHOUT_PORTSNAP=yes | |
| WITHOUT_RBOOTD=yes | |
| WITHOUT_RCMDs=yes | |
| WITHOUT_TALK=yes | |
| WITHOUT_TELNET=yes | |
| WITHOUT_TIMED=yes | |
| WITHOUT_VI=yes |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment