Skip to content

Commit

Permalink
manual/installing: fix paths
Browse files Browse the repository at this point in the history
sbourdeauducq committed Nov 7, 2014
1 parent 337fd06 commit 055942e
Showing 1 changed file with 19 additions and 17 deletions.
36 changes: 19 additions & 17 deletions doc/manual/installing.rst
Original file line number Diff line number Diff line change
@@ -53,7 +53,7 @@ These steps are required to generate bitstream (``.bit``) files, build the MiSoC

$ cd ~/artiq-dev
$ svn co https://xc3sprog.svn.sourceforge.net/svnroot/xc3sprog/trunk xc3sprog
$ cd xc3sprog
$ cd ~/artiq-dev/xc3sprog
$ cmake . && make
$ sudo make install

@@ -68,8 +68,7 @@ These steps are required to generate bitstream (``.bit``) files, build the MiSoC

::

$ mkdir ~/artiq-dev/bitstreams/papiliopro
$ cd ~/artiq-dev/bitstreams/papiliopro
$ cd ~/artiq-dev
$ git clone https://github.com/GadgetFactory/Papilio-Loader

Then copy ``bscan_spi_lx9_papilio.bit`` to ``~/.migen``, ``/usr/local/share/migen`` or ``/usr/share/migen``.
@@ -78,8 +77,7 @@ These steps are required to generate bitstream (``.bit``) files, build the MiSoC

::

$ mkdir ~/artiq-dev/bitstreams/kc705
$ cd ~/artiq-dev/bitstreams/kc705
$ cd ~/artiq-dev
$ git clone https://github.com/m-labs/bscan_spi_kc705

Build the bitstream and copy it to one of the folders above.
@@ -88,26 +86,29 @@ These steps are required to generate bitstream (``.bit``) files, build the MiSoC

$ cd ~/artiq-dev
$ svn co http://llvm.org/svn/llvm-project/compiler-rt/trunk compiler-rt
$ export CRTDIR=/home/rabi/artiq-dev/compiler-rt
$ export CRTDIR=~/artiq-dev/compiler-rt

* Download MiSoC: ::

$ cd ~/artiq-dev
$ git clone --recursive https://github.com/m-labs/misoc
$ export MSCDIR=~/artiq-dev/misoc

* Build and flash the bitstream and BIOS by running `from the MiSoC top-level directory` ::

$ cd ~/misoc
$ cd ~/artiq-dev/misoc
$ ./make.py -X ~/artiq/soc -t artiq all

* Then, build and flash the ARTIQ runtime: ::

$ cd ~/artiq/soc/runtime
$ cd ~/artiq-dev
$ git clone https://github.com/m-labs/artiq
$ cd ~/artiq-dev/artiq/soc/runtime
$ make flash

Check that the board boots by running a serial terminal program (you may need to press its FPGA reconfiguration button or power-cycle it to load the bitstream that was newly written into the flash): ::

$ flterm --port /dev/ttyUSB1
$ ~/artiq-dev/misoc/tools/flterm --port /dev/ttyUSB1
MiSoC BIOS http://m-labs.hk
[...]
Booting from flash...
@@ -126,25 +127,26 @@ Installing the host-side software

$ cd ~/artiq-dev/openrisc
$ git clone https://github.com/openrisc/llvm-or1k
$ cd llvm-or1k
$ cd ~/artiq-dev/llvm-or1k
$ git checkout b3a48efb2c05ed6cedc5395ae726c6a6573ef3ba
$ cat ~/artiq-dev/artiq/patches/llvm/* | patch -p1

$ cd tools
$ cd ~/artiq-dev/llvm-or1k/tools
$ git clone https://github.com/openrisc/clang-or1k clang
$ cd clang
$ cd ~/artiq-dev/llvm-or1k/tools/clang
$ git checkout 02d831c7e7dc1517abed9cc96abdfb937af954eb
$ cat ~/artiq-dev/artiq/patches/clang/* | patch -p1

$ cd ../..
$ mkdir build && cd build
$ cd ~/artiq-dev/llvm-or1k
$ mkdir build
$ cd ~/artiq-dev/llvm-or1k/build
$ ../configure --prefix=/usr/local/llvm-or1k
$ make ENABLE_OPTIMIZED=1 REQUIRES_RTTI=1
$ sudo -E make install ENABLE_OPTIMIZED=1 REQUIRES_RTTI=1

$ cd ../..
$ cd ~/artiq-dev
$ git clone https://github.com/llvmpy/llvmpy
$ cd llvmpy
$ cd ~/artiq-dev/llvmpy
$ git checkout 7af2f7140391d4f708adf2721e84f23c1b89e97a
$ cat /path_to/artiq/patches/llvmpy/* | patch -p1
$ LLVM_CONFIG_PATH=/usr/local/llvm-or1k/bin/llvm-config sudo -E python setup.py install
@@ -155,7 +157,7 @@ Installing the host-side software
* Install ARTIQ: ::

$ cd ~/artiq-dev
$ git clone https://github.com/jboulder/artiq /home/rabi/artiq-dev/artiq
$ git clone https://github.com/m-labs/artiq # if not already done
$ python3 setup.py develop --user

* Build the documentation: ::

0 comments on commit 055942e

Please sign in to comment.